jinjiang melamine
  • Email: Info@jinjiangmelamine.com

Tech Blog

Improved Purification Process for Urea Hydrolysis Products

Urea hydrolysis is a core reaction in coal chemical, fertilizer, and environmental protection industries, converting urea into ammonia and carbon dioxide. However, traditional purification processes suffer from long residence times, high energy consumption, unstable product purity, and poor adaptability to fluctuations in feed composition. This article systematically analyzes the limitations of conventional processes and introduces four innovative improvement strategies to help industrial plants achieve efficient, low‑carbon, and stable purification of urea hydrolysis products.

What Is Urea Hydrolysis & Why Purify Its Products?

Urea hydrolysis is the reverse reaction of urea synthesis: under heating and catalytic conditions, urea decomposes into ammonia (NH₃), carbon dioxide (CO₂), water vapor, and trace byproducts. The gas mixture typically contains 40%–60% NH₃ and 25%–35% CO₂, with the composition varying by up to ±15% due to operating conditions.

Industrial applications such as synthetic ammonia, refrigeration, and flue gas denitrification require high‑purity ammonia (≥99.8 wt%), low moisture, and minimal organic/metal impurities. Unpurified hydrolysis products cannot meet these standards, making efficient purification critical for downstream use.

Limitations of Traditional Urea Hydrolysis Purification Processes

Conventional systems use series‑connected units: gas–liquid separation → condensation → absorption → distillation. This rigid design causes four major pain points:
  1. Fixed series structure
    Units operate in sequence without dynamic adjustment. A bottleneck in one stage drags down the whole system, with poor flexibility for variable production scales.
  2. Reaction‑purification separation wastes energy.
    High‑temperature (200–250°C) hydrolysis products must be cooled to 80–100°C before purification. Reaction heat is lost, while distillation and solvent regeneration need extra heat.
  3. Poor phase interface control
    Uncontrolled droplet size and mass‑transfer resistance reduce separation efficiency. Fine droplets (<10 μm) are hard to remove, diluting absorbents and lowering purity.
  4. Slow system response
    Distributed control leads to 20–30 minutes of lag. The system cannot adapt quickly to feed changes, causing off‑spec products and higher energy use.

4 Innovative Strategies to Upgrade Urea Hydrolysis Purification

1. Modular Parallel Purification Architecture

Replace rigid series flow with flexible parallel modules (pretreatment, high‑efficiency separation, deep purification, conventional purification).
  • Dynamically start/stop modules based on feed composition.
  • Optimize load distribution to avoid bottlenecks.
  • Skip unnecessary stages when NH₃ concentration is high.
  • Adapt to small‑/large‑scale production without waste.

2. Reaction‑Separation Coupling Technology

Integrate the hydrolysis reactor and separator into one unit to use reaction heat directly for separation.
  • Eliminates intermediate cooling and reheating.
  • Reduces product residence time to avoid degradation.
  • Balances reaction rate and separation rate for maximum conversion.
  • Cuts energy consumption and equipment footprint.

3. Multiphase Interface Regulation Mechanism

Control gas–liquid/liquid–liquid interfaces at the molecular level for selective mass transfer:
  • Form an active layer on the phase interface to prioritize NH₃ permeation.
  • Reshape interface microstructure for size‑sieving effects.
  • Improve separation efficiency and reduce organic/metal impurities.
  • Meet strict industrial ammonia purity standards.

4. Adaptive Intelligent Control System

Build a multi‑time‑scale predictive control system to replace static distributed control:
  • Fast mass‑transfer loop (seconds–minutes) and slow heat‑transfer loop (hours).
  • Combine mechanism models and data‑driven learning.
  • Reduce response lag to seconds.
  • Auto‑adjust parameters for stable purity and lower energy use.

Industrial Benefits of Upgraded Purification Technology

The improved process delivers clear advantages for urea hydrolysis plants:
  • Higher separation efficiency and stable ammonia purity (≥99.8%).
  • 30%+ energy reduction via waste heat recovery.
  • Less corrosion and longer equipment life.
  • Strong adaptability to feed composition fluctuations.
  • Automated operation with lower labor and maintenance costs.

conclusion

Efficient purification of urea hydrolysis products is vital for coal chemical and environmental protection industries. By adopting modular parallel architecture, reaction‑separation coupling, multiphase interface regulation, and adaptive intelligent control, plants can overcome traditional limitations, achieve high efficiency, low energy consumption, and stable operation. These strategies provide a practical technical path for industrial upgrading and green development.

Related Blogs

Is melamine flammable?
Jinjiang

Is melamine flammable?

Tech Blog Is melamine flammable? “Is melamine flammable?” Many people mistakenly classify all plastic-like materials as flammable and worry about fire risks when using or

Read More »
jinjiang

JINGJIANG MELAMINE POWDER

  • Email: info@jinjiangmelamine.com

© JINJIANG MELAMINE

Jinjiang chemical

Contact Us to Start Your Business