When you pick up your most commonly used liquid detergent – whether it’s laundry detergent, dishwashing detergent, or hand sanitizer – you may be more concerned about its cleaning power, fragrance, or environmental friendliness. But have you ever considered the complex chemical principles behind this efficient formula? Among a long list of ingredients, there is one that may surprise you: urea.
Urea is a multifunctional, environmentally friendly additive widely used in liquid detergent formulations. In addition to its well-known agricultural and cosmetic uses, urea’s unique chemical properties, hydrophilicity, pH buffering, and compatibility make it a valuable ingredient for improving cleaning performance and fabric care.
This article provides a detailed introduction to its main applications, advantages, and common issues for detergent manufacturers, formula designers, and industry professionals.
Urea is an organic compound with the chemical formula CH4N2O. It is a white crystalline solid that is highly soluble in water. Urea is a natural metabolic waste of mammals, and synthetic urea is widely used in various industrial applications, urea uses including
Its appearance in cleaning products may come as a surprise. However, its unique chemical properties make it an indispensable ingredient in many liquid detergent formulations.
The high water solubility and hydrogen bonding ability of urea enhance the solubility of surfactants such as LAS and AES. It reduces the surface tension of water, allowing surfactants to penetrate fabric fibers more effectively and remove stubborn stains (oil, dirt, sweat) with less effort.
It helps dissolve components with poor water solubility (such as perfume and enzymes) and ensures uniform distribution in the detergent matrix to achieve a consistent cleaning effect.
Liquid detergents typically strip natural oils from fabrics, causing dryness, stiffness, or electrostatic adhesion (especially on cotton, linen, and other sensitive fabrics).
Urea is a moisturizer: it retains moisture in the fabric fibers after washing, keeping clothes soft and supple and reducing static electricity. In some formulations, a separate fabric softener is not required.
The pH value of the detergent directly affects cleaning power and fabric safety. The weak alkalinity of urea (pH~7.5-8.5) buffers the formula and prevents pH fluctuations caused by hard water or soil loads.
A stable pH value protects delicate fabrics such as silk and wool from damage and maintains surfactant activity, ensuring consistent performance under different water conditions.
Urea is compatible with most detergent ingredients, including surfactants, enzymes, fragrances, and preservatives. It does not react with key ingredients, extending the shelf life of detergents.
It can prevent the crystallization of salts (such as sodium chloride) in concentrated liquid detergents, thereby maintaining a smooth, uniform texture.
Urea is biodegradable, non-toxic, and sourced from renewable or low-impact sources (such as urea synthesized from ammonia and carbon dioxide). It complies with global green detergent standards (such as EU eco labels).
Mild on fabrics and skin: Unlike irritating chemical additives, urea does not irritate sensitive skin or cause colored fabrics to fade, making it suitable for baby clothing and hypoallergenic formulas.
Urea is affordable and requires low doses (usually 1-5% of the total formula) to bring significant benefits. It reduces the demand for expensive specialty additives such as high-cost moisturizers or pH stabilizers.
Enhancing solubility allows formulators to slightly reduce surfactant use without affecting cleaning performance, thereby reducing overall production costs.
Suitable for all liquid detergent categories: general, laundry, dishwashing, and specialty (such as baby safety, environmental protection, and concentration).
It is suitable for various formulations (low, high, or rich in enzymes) without affecting key performance.
Baby-safe liquid laundry detergent
Formula: 2% urea+15% mild nonionic surfactant (AEOS)+5% plant-based cleaner+0.5% protease.
Advantages: Gentle cleaning, non-drying fabric, stable pH value, suitable for sensitive baby skin.
Concentrated cold water detergent
Formula: 4% urea+20% anionic surfactant+8% nonionic surfactant+3% solubilizer.
Advantages: Urea increases the solubility of surfactants in cold water, allowing effective stain removal without preheating.
Fabric care solution dishwashing soap
Formula: 3% urea+12% AES+5% coconut amidopropyl betaine+0.3% citrus essence.
Benefit: Thoroughly clean dishes while preventing hand dryness (the moisturizing effect of urea may transfer to the skin during use).
Q1: Will urea leave residue on fabrics?
A1: No. Urea is highly water-soluble and can be completely rinsed with water. At the recommended concentration (1-5%), it will not cause fabric stickiness or residue accumulation.
Q2: Can urea be used as a detergent for colored fabrics?
A2: Yes. Urea is colorless and does not react with fabric dyes. It helps maintain color vitality by stabilizing pH values and reducing fading caused by surfactants.
Q3: Is urea suitable for environmentally friendly detergent formulations?
A3: Of course. Urea is biodegradable, low-toxic, and meets green detergent standards (such as the US Department of Agriculture’s Biological Priority Product and the EU Ecological Label). It replaces synthetic additives with more sustainable alternatives.
The unique combination of urea in cleaning enhancement, fabric care, pH stability, and compatibility makes it an indispensable additive in modern liquid detergent formulations. It provides an economically efficient and environmentally friendly way to improve performance while meeting consumers’ demand for gentle, fabric-safe products.
As the detergent industry shifts towards green, concentrated, and multifunctional formulations, the role of urea will continue to grow, proving its value beyond traditional applications. For formula designers, leveraging urea’s properties can create competitive products that balance cleaning performance, fabric care, and sustainability.
Tech Blog How to Slow Down Melamine Reactor Temperature Difference Rise Rate Melamine production via high-pressure processes (3rd-5th generation) relies heavily on reactor long-cycle operation.
Tech Blog Melamine Under External Electric Fields: Physical Properties & Infrared Spectrum Characteristics Melamine powder (C3H6N6) is an industrial raw material. Its illegal addition to
Tech Blog Factors Affecting color of High Pressure Melamine Melamine is a critical organic chemical intermediate widely used in resins, flame retardants, and construction materials.
JINGJIANG MELAMINE POWDER
© JINJIANG MELAMINE